|
|
 |
 |
|
The Small Motor Assembly platform ("SMA") from Phase Automation was designed from the ground up to efficiently build compression driver, tweeter and other small motor structures. The SMA is designed to work with ceramic and neodymium motor structures from below 10mm up to 110mm. The machine allows a limited number of staff to rapidly produce neodymium and ceramic based motor structures at approximately 4 second intervals. The SMA is equipped with three fixed and two free-standing adhesive stations with integrated device controllers for dispensing single part and two part adhesives. An integrated delay system allows the operators to load motor assemblies with uncured adhesive and retrieve "cured" motor assemblies only inches |
apart. The SMA will process up to 4" motor structures in standard configuration with options for 8" motors available on request. based on operator speed and adhesive selection, fully processed motor structures, including structures with shorting rings, copper caps and bucking magnets, can be processed in as short as 4 seconds. At the end of the SMA process, the completed motors are available for matching with soft part kits at the final assembly stage.
|
|
